DCP 200/240/300 Piece/Tablet sachet bag packing machine
Main Introduction:
DCP series machine is specially designed for packing solid piece products, such as tablets or capsules.
DCP series tablet or capsule packing machine adopts mould mounting method to packing bag. Different size tablet, capsule, and different quantity need different mould. This method is according to National measure standard. This series packing machine is skilful, special and beautiful figure, all parts touching with raw material are Stainless steel which accord with healthy standard. After over ten years experience, this series machine function is stable and widely used in pharmaceutical, food, chemical etc industries.
1. PLC control the length of the bag,(width should be fixed), operation is easy, bag making is accurate.
2. Photo-electricity sensor automatically tracking to prevent from wrong action and to control the length of bag.
3. Step-less speed control and two heat control.
4. Plc control the step motor, accurate filling, easy to operate, running is stable.
5. Maintenance is convenient.
6. According to GB/T17313—1998 Standard.
7. Packing material: BOPP/VM PET/PE , PET/VM PET/PE , PET/AL/PE, BOPP/AL /PE , PET/PE, Paper/PE,
Technical Specifications
Specifications Model
DCP200 DCP240 DCP300
Sealing method three side seal Three/four-side /Three
/Four/back Sealing
Method of Measurement piece-counting type
Range of Measurement according to the size of the actual piece
Packing Speed 20-60 bag/min 20-60 bag/min 20-60 bag/min
Bag Size W:30-100 mm
L: 30-150 mm W:30-120 mm
L: 30-155 mm W:30-150 mm
L: 30-155 mm
Bag Size in(INCH) Width: 0.4—4.72
Length: 1.18—3.9
And can be made to need Width: 0.4—4.72
Length: 1.18—6.1
And can be made to need Width: 0.4—5.9
Length: 1.18—6.1
And can be made to need
Total Power 875W 1400W 1600W
Voltage 380V or 220V or Made to need
Weight 180kg 190kg 220kg
Overall size 625*751*1558mm 625*751*1558mm 625*730*1780mm
|
|
|
|
Product Image
|
